|
Aluminum Deoxidizer for CarsFor BMW, Jaguar, Mercedes,Volvo, Saab, Volkswagen, and others. Flexible water-based deoxidizer lasts indefinitely.To restore that shiny anodized aluminum look to oxidized aluminum, the aluminum surfaces are wet sanded with 1000 grit sandpaper, then the water-based deoxidizer is applied with the applicator using a flow on motion. The oxidized look immediately disappears leaving a shiny anodized aluminum finish. Kit includes Cleaner, Coating, Remover, 1000 Grit Sandpaper, and instructional CD. |
$39.95 |
Rubber Rebuilder KitThis kit was designed for older cars which have oxidized and pitted rubber trim pieces. These trim pieces are expensive new, and used ones usually look the same as what you have. After the surfaces are cleaned, four or five coats of the brush on coating are applied and dried, then sanded. This process is repeated until all pitts have been filled. A final coat is then applied which leaves a satin finish. The coating remains flexible for an indefinite period of time. Kit contains: coating, cleaner, sandpaper, brushes, and instructional CD. |
$49.95 |
Aluminum Deoxidizer for BoatsThe aluminum used as exterior trim on boats tends to become chalky or oxidized within a few years of exposure to the elements. Our proprietary product and method of application creates an effective alternative to the usual acids and temporary waxes. Our deoxidizer stands up to acid rain which is the main cause of oxidation. We guarantee that the end result will remain effective for at least one year after application. In most cases this treatment still looks good after two years. If properly maintained by quarterly waxing, the result will last indefinitely. Patent Pending # 12/191,357 |
$49.95 |
BMW Rocker Panel Refinishing KitDesigned for BMW 3-5-7 Series
This highly pigmented, water based polymer is able to be brushed on because it is the consistency of water with an extraordinary ability to cover. Apply with a foam brush, included in the kit, for a seamless end result every time. Drys quickly, maintains detail, and leaves no brush strokes. Kit includes Cleaner, Coating, Brushes, and instructional CD. |
$49.95 |
In most cases, it is relatively easy to polish motorcycle un-anodized aluminum engine parts. The problem is that after all that time and effort, the oxidized, dull surfaces return within a short time..The ClassicTrimcoat waterbased final coat was designed to withstand the extreme temperatures found on these surfaces, sealing them from further oxidation. After surfaces are sanded, polished, and cleaned, the specially formulated water based coating is not sprayed on, but wiped on. This eliminates any need to mask, or spray. This process also eliminates any possibility of an orange peal final look. In addition, there is no possibility of getting overspray on your bike because the coating is not sprayed on.
|
$49.95 |
For BMW, Mercedes, and all models with black anodized aluminum. Flexible water based deoxidizer lasts indefinitely.To restore that shiny anodized aluminum look to oxidized aluminum, the aluminum surfaces are wet sanded with 1000 grit sandpaper, then the water-based deoxidizer is applied with the applicator using a flow on motion. The oxidized look immediately disappears leaving a shiny anodized aluminum finish. Kit includes Cleaner, Coating Remover, 1000 Grit Sandpaper,, and instructional CD. Patent Pending # 12/191,357 |
$29.95 |
The front covers on the E38 740i BMW are known to peel and make this hi tech engine look poorly. This simple fix is easy to do, and lasts indefinitely. The water based coating is a special formula which with stands the extreme engine heat and keeps your BMW looking factory fresh. |
